Modifying Fiat Linea 1.4 NA

[Torque7]

We tested the Linea 1.4 over a dyno with our Air Intake Revision Kit at KS Motorsports.

The test process is explained below:
1. Test runs on the stock air intake by the owner
2. Installed the AIR and did few more test runs
3. Reverted back onto the stock air box and put the car on the rolling road - dyno
4. Did several runs on the dyno and used the best dyno run for reference.
5. Added the AIR again and did several runs on the dyno using the best for reference.

The results as shown below.

Linea 1.4 NA peak power 76.83hp @ 5700 rpm


Linea 1.4 NA with air intake revision - peak power 82.35hp @ 6050 rpm

Note: The Linea was already running on a ECU remap by a different company.

Regards,
Torque7

 

[jayadev]

it seems 1.4 linea is already in its best .i see only marginal improvement comapred to 1.2 litre engine.

 

[Torque7]

The Linea was already running with an ECU Remap from another company.
It takes time for the ECU to adjust to addition of the AIR as it undergoes through a learning phase.

The results could have been improved further if the ECU was remapped by our team.
With time the power delivery improves slightly as the ECU has adjusted itself to the additions.

Regards,
Torque7