Tandon Motorcycles


Thread Starter #1
Joined
Oct 30, 2011
Messages
745
Likes
41
Location
DOHA
Source: Tandon

Tandon were motorcycles produced by Devdutt Tandon, who had been born in India, from 1948 to 1959, in Watford, Hertfordshire.
Made Milemaster, Supaglid models, a Kangaroo trials model, Imp and Starlett, as well as several others.

1948 The first model appeared as a cheap lightweight intended for both home use and export. Lacking in refinement, it was fitted with a 122cc Villiers 9D pre-war engine, installed in a frame that was of tubular, bolted construction. Although it had telescopic forks, it was angular and not at all stylish.

1950 The original model was joined by a much improved machine, known as the Supaglid, fitted with the more modern 122cc 10D engine and pivoted-fork rear suspension controlled by a rubber cartridge.

1951 Another version appeared, with a 197cc 6E engine, plus a competition model.

1952 Production of the original, somewhat crude model, stopped that year.
Further models were produced using 147cc and 224cc Villiers and 242cc and 322cc British Anzani engines.

1955 Time and money ran out and so the firm was wound up late in the year.

1956 The name reappeared on two road models using Villiers 8E and 1H engines.

1959 After a few more years of production, no further machines were built after that year.
 

Attachments

Joined
Aug 22, 2009
Messages
2,977
Likes
27
Location
India
Re: Tandon Motorcycles.

wow! very good info. it has typical indian style [thumbsup] any info how many there are now?
 
Joined
Jun 9, 2011
Messages
90
Likes
3
Location
Cyberspace
Re: Tandon Motorcycles.

Beautiful...just beautiful. Too bad it ended up a rust bucket. Is somebody going to restore that? (please do)
 
Joined
Sep 28, 2011
Messages
1,253
Likes
608
Location
Coimbatore
Re: Tandon Motorcycles.

Hi,
AS everyone think, its really a fantastic information. Frankly say, this is the first time i heard about this.
 
Joined
Oct 14, 2012
Messages
699
Likes
413
Location
Calcutta
Re: Tandon Motorcycles.

Tandon Motorcycles were manufactured in Watford by Devdutt Tandon (1902–1980)—from 1947 to 1959—for export to his native India and other third world countries initially. The simplicity of the initial Tandon design reflected the chosen export market where the two-stroke engined motorcycles were to be sent CKD (Completely Knocked Down) for assembly abroad. Indeed, it took one Tandon factory worker only eight hours to completely assemble four Tandon motorcycles. The model in question was the 122 cc Milemaster, powered like all but the last Tandons by a Villiers two-stroke engine. Tandon received great publicity when Pandit Nehru, the Prime Minister of India, was photographed astride a Milemaster while visiting Caxton Hall in 1948.

The export plan never materialised and the Milemaster, with its modest specification—hand gear change and bicycle seat—and lacking rear suspension, was marketed instead in the United Kingdom until 1952. In 1949, Tandon introduced the 122 cc Superglid featuring conventional foot gear-change and a new frame with swinging-arm rear suspension. However, the suspension itself was highly unusual with damper units being replaced by a bell crank linked to rubber bands for suspension and a hard rubber block for compression action, all located under the gearbox.

Sufficient sales enabled Tandon to move to larger premises within Watford from Bushey Hall Road to Colne Way and introduce the larger-engined 197 cc Superglid Supreme. The short-lived (1951–53) but relatively popular 122 cc Kangaroo trials model boasted the attractions of significant ground clearance and light weight with a 197 cc Kangaroo Supreme also featuring conventional damper units in the swinging-arm rear suspension. A Tandon 200 cc scrambler model enjoyed success beating a factory-sponsored 500 cc BSA motorcycle in an Irish handicap race in 1956.

Replacing the Milemaster was the 122 cc Imp which sacrificed rear suspension for light weight. However, the later, larger 197 cc Imp Supreme adopted conventional rear suspension.

New roadster models with conventional rear suspension, stronger frames and bigger engines were introduced in 1954 being the 224 cc Monarch (also known as the Sprite) and, with a 242 cc British Anzani (and later 322 cc) two-stroke twin cylinder engine, the Viscount (also known as the Twin Supreme). These did not have as standard the telescopic front fork as fitted to prior Tandon models but instead boasted an Armstrong Earles-fork arrangement. These and the new 99 cc Starlett scooter could not stop Tandon Motors Limited being wound-up in 1955 by the United Kingdom Commissioner of Custom & Excise, their sales hampered by a dealer network not extending outside London. Devdutt Tandon was able however to continue manufacture of his motorcycles through his other firm Indian Commerce & Industries Limited until 1959.

Tandon motorcycles suffered from a poor reputation as regards design, materials and build quality, enjoying only limited popularity. Their simplistic approach, perhaps born out of an initial design philosophy catering for the third world market, finally was neither sold cheap enough to attract the budget market nor was of sufficient quality to challenge other similar lightweight competitor marques.
Source:Wikipedia
 

Top Bottom