Now, That's a Man: Pre-Worshipped Maruti Suzuki SX4 ZDi (Rebuild & Ownership Review)


Thread Starter #16
Joined
Oct 1, 2018
Messages
73
Likes
179
Location
Kollam
What are the symptoms of broken rocker arms??
Why would it break by itself in the first place??


It would have remained hidden if not for this diy.
Symptoms of broken rocker arms are clicking, ticking, or clunking noises from the engine, low pickup, excessive engine vibration, missing, and in worst case scenario, Engine won't start..

Rocker Arms may broke due to various reasons..
For example: Seized valve, seized HLA, crack in rocker arm due to age,high temperature etc
I don't know what happened here...[think]

Later, I found the "needles" from the bearings of rocker arms in the oil stainer while cleaning.[cry]
Compress_20220426_112519_9389.jpg

images - 2022-04-28T151808.563.jpeg
 

mayankdixit

Honoured Member
Joined
May 16, 2014
Messages
1,885
Likes
3,360
Location
kanpur
Later, I found the "needles" from the bearings of rocker arms in the oil stainer while cleaning.[cry]
This means rocker bearing just shattered
God knows how much scoring and damages it may have done (to a running engine )while on its passage downwards to the oil sump.


Just realised on seeing the pics that sx4 diesel has SOHC engine with a "timing chain". One less thing for you to worry about.
 
Last edited:
Thread Starter #18
Joined
Oct 1, 2018
Messages
73
Likes
179
Location
Kollam
This means rocker bearing just shattered
God knows how much scoring and damages it may have done (to a running engine )while on its passage downwards to the oil sump.
Luckily it won't scratch or damage anything during its journey towards oil sump.[:D]
Just realised on seeing the pics that sx4 diesel has SOHC engine with a "timing chain". One less thing for you to worry about.
No, it is not a SOHC Engine, its a DOHC Engine.. Please refer the pic below..
Compress_20220426_112527_7799.jpg
 

mayankdixit

Honoured Member
Joined
May 16, 2014
Messages
1,885
Likes
3,360
Location
kanpur
No, it is not a SOHC Engine, its a DOHC Engine.. Please refer the pic below..
You are correct.
This pic of yours got me confused.
I now realise its from the other side only that you can see 2 camshaft pulleys.

1651212122237.png






Luckily it won't scratch or damage anything during its journey towards oil sump.[:D]

How so??
 
Last edited:
Thread Starter #20
Joined
Oct 1, 2018
Messages
73
Likes
179
Location
Kollam
Thread Starter #21
Joined
Oct 1, 2018
Messages
73
Likes
179
Location
Kollam
Cleaning the Mess!
Before moving any further, let me tell you why I do this. (Doing this huge work by myself.)

The main reason is that I don't trust service centres or local workshops for this job.
(I am not saying that all garages/service centres are bad, but as per my experience, the majority of the garages don't do things in the proper way.)
While doing work like this, every minute thing we do counts. Every minute mistake we make affects the overall life of the engine drastically.
(I am not saying that I am an expert in this field or I am better than experienced technicians :lol!:.)
But I am pretty sure that the majority of the service centres and workshops (not blaming everyone) don't do things properly. They always do things in a hurry and make a lot of mistakes that can kill a completely rebuilded engine quickly.)
Latest Example
SAVE_20220430_174033.jpg

This was the engine of my friend's swift diesel. Recently, the engine was overhauled in a FNG. But after the overhaul, the engine oil started to leak severely from the oil pan and timing cover.
He visited the FNG multiple times to clear this issue, but the issue was not resolved. The garage guys tried their best to seal the leak, but nothing resolved the issue.

Reason: While overhauling, the garage guys used a screwdriver to pry open the oil pan, and it damaged the oil pan a little and scratched the aluminum mating surface of the engine.
The leak from the timing cover is due to the reusing of worn out timing cover gasket.
(I don't know why they are taking risk on these kinds of things.)

This is not a random incident, many of us may have faced similar issues, even from Authorized Service Centers.
I don't want anything like that to happen in my Sx4.
So that was the main reason I decided to do the overhaul by myself.
Another reason is that i really want to rebuild a car by myself. It has been a big dream for me for a very long time.
(I am a huge fan of 'OVERHAULIN' Tv Series & the youtube channel 'Hagerty' [:D])
All of these things gave me enough boost to do this task by myself..
Okay, so that's enough talking. Let's jump back into the thread..

The Battlefield!
Cleaning was the most difficult part of this job.
You need a lot of time and patience to properly clean these things. It took almost two weeks for me to complete the whole cleaning process.

Compress_20220426_112441_1370.jpg
Compress_20220426_112443_3180.jpg

FPT Logo! (Fiat Powertrain Technologies)
Compress_20220426_112442_2247.jpg

EGR Nozzle clogged completly with carbon
Compress_20220426_112440_0401.jpg
Compress_20220426_112440_0714.jpg

Condition of Piston
Compress_20220426_112450_0693.jpg
Compress_20220426_112444_4004.jpg

After tonnes of hardwork..
Compress_20220426_112517_7974.jpg
Compress_20220426_112516_6063.jpg
Compress_20220426_112514_4121.jpg

Pistons are in good conditon
Compress_20220426_112455_5727.jpg
Compress_20220426_112527_7799.jpg
Compress_20220426_112530_0627.jpg
Compress_20220426_112532_2380.jpg
Compress_20220426_112533_3823.jpg
IMG_20220430_211642.jpg

So,the cleaning process is now completed.
It's time to order the parts needed for rebuilding the engine and gearbox.
Here is the list:
  • Valves
  • Valve Seal
  • Rocker Arms
  • Hydraulic Lash Adjusters
  • Clutch Assembly
  • Clutch Release Bearing
  • Oil Pump
  • Valve Cover Gasket
  • Dipstick Rubber Seal
  • Oil Cooler
  • Air Filter Box Rubber Hose
  • Flywheel
  • Head Gasket
  • Maruti Genuine Sealant (ThreeBond 1215)
  • Thermostat Assmebly
  • Oil Seperator
  • 1st and 2nd Synchronizer Gear
  • Crankshaft Oil Seal (Flywheel Side)
  • Gearbox Oil Seals
  • All Rubber Hoses and Coolant Pipes
  • Timing Kit
  • Piston Kit
  • Glowplug
  • Throttle Body Cleaner
  • Clutch Cover Bolts
  • Main Bearing
  • Connecting Rod Bearing
  • Connecting Rod
  • Engine Oil (5w30 Fully Synthetic)
  • Transmission Oil (75w90)
  • Front Brake Pad
  • Serpentine Belt
  • Water Pump
  • Oil Filter
  • Fuel Filter
  • Injector Copper Washer
  • Oil Pump/Timing Cover Gasket
  • Vaccum Pump Gasket
  • Brake Fluid
  • Strut Kit
  • Stabilizer Link
  • Gear Knob (Ciaz)
  • Gear Lever Assembly
  • Gear Lever Boot
 
Last edited:

mayankdixit

Honoured Member
Joined
May 16, 2014
Messages
1,885
Likes
3,360
Location
kanpur
let me tell you why I do this. (Doing this huge work by myself.)
The main reason is that I don't trust service centres or local workshops for this job.
(I am not saying that all garages/service centres are bad, but as per my experience, the majority of the garages don't do things in the proper way.)
While doing work like this, every minute thing we do counts. Every minute mistake we make affects the overall life of the engine drastically.
(I am not saying that I am an expert in this field or I am better than experienced technicians.But I am pretty sure that the majority of the service centres and workshops (not blaming everyone) don't do things properly. They always do things in a hurry and make a lot of mistakes that can kill a completely rebuilded engine quickly.)
Totally agree with you. Thats why I started working on my bike, scooters and cars, myself.
I found out I could do better than most of those so called mechanics. Not because I was better actually than them, but because I loved and cared for my rides and they never cared for my rides. It was obvious when they worked very roughly upon my car in the service centre.
They never even show basics work ethics like using my cars bonnet as a tool tray. Switching on the car for some work ,diverted to some other car and keeping my car idling , forgetting it for like 30 min with damn care attitude, etc etc. And this is just the start. Real hell starts when they work upon the engine and start opening things!!
 
Last edited:
Thread Starter #23
Joined
Oct 1, 2018
Messages
73
Likes
179
Location
Kollam
Ordering Parts and Clearing other Issues
The majority of the parts were ordered from Popular Auto Dealers Kollam.
unnamed (8).jpg
However, they informed me that they don't have half of the parts listed in stock, so I will have to wait a few weeks for everything to be delivered.
After ordering parts from Popular, I went to Cars Automobiles
images - 2022-05-01T141438.569.jpeg
(one of the well-known automobile spare parts shops in Kollam) and purchased the remaining spares.

Valves- EVL(OEM)-1900

images - 2022-05-01T152927.455.jpeg

Valve Seal (MGP) -350
images - 2022-05-01T153058.562.jpeg

Main & Connecting Rod Bearings (BM/Bimite (OEM))
Compress_20220501_144127_7209.jpg

Timing Kit- INA (OEM)- 1900
Compress_20220501_143218_8400.jpg

Compress_20220501_143219_9626.jpg

Piston Kit- Goetze (OEM)- 12000 (Includes STD Size Cylinder Liners, Pistons,Pins, Circlip and Piston Rings)
Compress_20220501_143221_1767.jpg
Compress_20220501_143220_0627.jpg

Piston Rings
Compress_20220501_143223_3119.jpg
Compress_20220501_143226_6078.jpg

Cylinder Liners
Compress_20220501_143249_9234.jpg

Compress_20220501_143247_7202.jpg
Compress_20220501_143239_9050.jpg
Compress_20220501_143241_1752.jpg

Pistons and Pins
Compress_20220501_143232_2689.jpg
Compress_20220501_143229_9395.jpg

Glow Plugs: 600 per plug
Compress_20220501_143252_2800.jpg

After the purchase, I gave the cylinder head to a reputed machine shop for a complete overhaul (Replacing valve, valve guide, valve seal, and valve seat) and also gave the cylinder block to replace the cylinder liners.

After the work
Compress_20220501_143436_6346.jpg
Compress_20220501_143434_4823.jpg
Compress_20220501_143437_7612.jpg

Now, the next task is to fix the turbocharger. The oil leak from the turbocharger is mainly due to worn-out rings inside the core. We can solve this issue by either repairing the core using a repair kit or replacing the core completely.
The condition of my turbo's core is not that bad. Apart from the leak, it doesn't have any kind of excess play in the impeller. So I decided to go for repair rather than replacing the core.
(If your impeller has a lot of free play, replacing core is the better option)

Repairing the turbo of the SX4 costs Rs. 4,000 approx.
Replacing the core costs Rs. 8,000 approx.

Turbo Repair Kit
images - 2022-05-01T164203.436.jpeg

I decided not to do the repair by myself because I am not prepared for that experiment right now.:lol!:
So I gave my turbo to a shop called 'Quilon Turbo' where they do all kinds of turbo repair works.
(Search 'Quilon Turbo' on youtube and you guys can see his works.)

2022-03-16 (1).jpg

But before giving it to the shop, I really want to see the condition inside the turbo. So I disassembled the turbo and here are the pics.
Compress_20220426_112543_3684.jpg
Compress_20220426_112545_5194.jpg

Carbon deposits
Compress_20220426_112550_0570.jpg

Variable nozzles are not moving freely
Compress_20220426_112555_5201.jpg
Compress_20220426_112557_7974.jpg
Compress_20220426_112558_8923.jpg
Compress_20220426_112600_0333.jpg

Compress_20220426_112603_3446.jpg

After cleaning
Compress_20220426_112604_4418.jpg
?hash=ace7875bf1f7eb394337b6543371f60f.jpg
Compress_20220426_112609_9388.jpg

Compress_20220426_112612_2980.jpg
Compress_20220426_112616_6634.jpg
Compress_20220426_112617_7777.jpg
Turbo after repaired..(from the shop)[cheers]
Compress_20220426_112620_0627.jpg

After resolving the issue with the turbo, I decided to go for fuel tank cleaning.
But to my surprise, the fuel tank looks like brand new from inside! (Sorry, forgot to take pics.)
Compress_20220426_112433_3319.jpg
Compress_20220426_112434_4823.jpg

After Cleaning
Compress_20220501_143207_7917.jpg
Compress_20220426_112626_6360.jpg

The only dirt I found while cleaning this fuel tank was inside the fuel pump assembly..
Compress_20220501_143212_2995.jpg

For a reference, here is the pic of my beat's fuel tank while cleaning
SAVE_20220501_185605.jpg
SAVE_20220501_185617.jpg
SAVE_20220501_185648.jpg

Condition of Diesel [frustration]
SAVE_20220501_185631.jpg
 

Attachments

mayankdixit

Honoured Member
Joined
May 16, 2014
Messages
1,885
Likes
3,360
Location
kanpur
This is the first time I am seeing pics of inside the tank. Very laborious and vey thorough job !!
Thanks for sharing with us.


p.s Most of the parts you bought and posted are clearly Non-OEM. Are you OK with that?
 
Last edited:
Thread Starter #25
Joined
Oct 1, 2018
Messages
73
Likes
179
Location
Kollam
This is the first time I am seeing pics of inside the tank. Very laborious and vey thorough job !!
Thanks for sharing with us.


p.s Most of the parts you bought and posted are clearly Non-OEM. Are you OK with that?
No brother, everything i purchased was OEM (Orginal Equipment Manufacturer).
It doesn't matter if the packing was MGP or not, the manufacturer and the quality was not changing..

Let me clear your doubt...
If you purchase the timing kit of this vehicle as Maruti Genuine Part (MGP), it doesn't mean that the part was manufactured by Maruti.
The Orginal Equipment Manufacturer of this vehicle's Timing Kit was INA. It doesn't matter if its MGP's packing or INA's packing, the product inside remains same.
Examples:
Compress_20220501_210518_8539.jpg

IMG_20220501_210023.jpg

This applies to almost every part of the vehicle..
More Examples:
See the GOE marking in MGP piston ring & Goetze piston rings?
Compress_20220501_213037_7970.jpg
Compress_20220501_213038_8896.jpg

MGP Clutch Disc:

OEM was Valeo
Compress_20220501_213039_9592.jpg

Rubber Hoses:
OEM was Lakshmi (some local manufacturer)
Compress_20220501_214800_0257.jpg


Maruti was just labelling parts manufactured by other manufacturers as Maruti Genuine Parts.
(
Not only maruti, almost every car manufacturers are following this method)
So, it doesn't matter what kind of packing the product comes with (even if it's MGP's packing or not), unless the Original Equipment Manufacturer is not changing, you are using the original spare part!
 
Thread Starter #26
Joined
Oct 1, 2018
Messages
73
Likes
179
Location
Kollam
Minor Suspension Work
There is a little bit of rattling noise coming from the front suspension system, and the steering feels a little wobbly sometimes. And of course, the steering has that famous 'Sticking' issue (a very common issue in most Maruti cars) and we are going to fix that too.[evil].

Disconnecting EPS Wiring harnesses
Compress_20220501_143546_6920.jpg

Front suspension frame removed!
Compress_20220501_143548_8784.jpg

Front suspension Frame.
i really like this type of setup! Everything was easy to replace. No need to crawl under the car!
Compress_20220501_143550_0691.jpg

Weak stablizer link (reason behind the wobbly steering wheel)
Compress_20220501_143553_3374.jpg

Wornout stabilizer bushes
Compress_20220501_143554_4794.jpg

Compress_20220501_143559_9037.jpg

While disconnecting the steering, I forgot the fact that this car has airbags and steering-mounted audio controls. I saw this warning sticker that says "refer to manual before removing steering," but I didn't give enough attention to that at that time.:stupid:
Compress_20220503_115410_0735.jpg

After removing the suspension and trying to dismantle things, all of a sudden, I remembered that this car has ABS, and there must be a clockspring, and that sticker was the warning for the clockspring.
For anyone who doesn't know what a clockspring is; Clockspring aka Contact coil is a spiral-wound special rotary electrical connector which allows a vehicle's steering wheel to turn while still making an electrical connection between the steering wheel airbag and/or the vehicle's horn and other devices and the vehicle's electrical systems
The problem here is that the clockspring can only turn a limited number of times. If we exceed that amount, the coil inside the clockspring will break, and it will cut the connection to the horn, airbag, and steering-mounted audio controls.

Luckily, I didn't rotate the steering wheel too much. But now I had to align the clockspring to the centre before installing the steering rack back.[frustration]

Aligning the Clockspring
Airbag removed
Compress_20220501_143826_6258.jpg

Compress_20220501_143842_2211.jpg
Removing steering wheel
Compress_20220501_143827_7384.jpg
Compress_20220501_143830_0586.jpg

Normally, clocksprings have 'Turns' marked on them. Like this..
IMG_20220503_125151.jpg

But some clocksprings don't have turns marked on them, instead it has a glass window to find the center. Like this..
IMG_20220503_125335.jpg

Here, we don't have any turns marked or glass window to find center.
Compress_20220501_143832_2952.jpg

The only markings it has are these two arrows.
So to align the clockspring now, we have to find the turns first. To find that, slowly rotate the clockspring from end to end and count the turns. Here I get a total of 5 turns.
So 2.5 turns is the center!
Compress_20220501_143835_5383.jpg

The clockspring was aligned properly and the job was completed successfully.
(Now lock the steering wheel and do not unlock it until we reconnect the steering rack.)
Compress_20220501_143845_5997.jpg

Now let's continue the suspesnion work
Disassembling Steering Rack
Compress_20220501_143601_1156.jpg
Compress_20220501_143602_2308.jpg
Compress_20220501_143607_7107.jpg
Compress_20220501_143609_9236.jpg
Compress_20220501_143610_0854.jpg
Compress_20220501_143616_6029.jpg

Rack removed
Compress_20220501_143618_8222.jpg

Rack Bush
Compress_20220501_143627_7125.jpg
Compress_20220501_143629_9456.jpg

After everything cleaned
Compress_20220501_143632_2656.jpg

Rackbush is okay, but not great in condition.It needs a replacement. But the problem is that this steering rack bush is not available anywhere.We need to make a custom nylon bush for this steering rack. That's the only option. So I decided to postpone this for now..
(Replacing the steering rack assembly costs 35k!!!)
Compress_20220501_143633_3785.jpg

OEM of this steering rack was SHOWA
Compress_20220501_143639_9164.jpg

Removing Lower Arms (Lower arms are okay in condition but needs repair/replacement soon)
Compress_20220501_143645_5225.jpg

Little bit of patch work near the middle engine mount. Needs proper cleaning and painting to prevent rust.
Compress_20220501_143648_8198.jpg

After cleaning, sanding and painting
Compress_20220501_143714_4139.jpg
Compress_20220501_143719_9027.jpg

Old vs New Stabilizer bush
Compress_20220501_143727_7669.jpg

To solve the "sticky steering wheel" issue, we need to use the fine valve grinding paste and grind this plastic gear a little.
The sticky steering wheel is a common issue in many Maruti cars, and the reason behind this issue was this plastic gear. Due to age and usage, the plastic teeth of the gear may deform a little, and due to this, the gear won't move smoothly. By grinding the gear, we are smoothing the teeth, and the issue will clear completely.
(Sorry I couldn't take pics of the process, but here are the steps for reference.)

After, grinding and lubing
Compress_20220501_143737_7348.jpg

We don't need a vice to repair steering rack in this vehicle! :lol!:
Compress_20220501_143739_9583.jpg

Compress_20220501_143742_2900.jpg

Everything completed
Compress_20220501_143750_0173.jpg

Compress_20220501_143803_3778.jpg

Replacing Strut Mount
Compress_20220501_143807_7565.jpg
Compress_20220501_143811_1170.jpg

OEM of Strut was Gabriel
Compress_20220501_143812_2831.jpg
Compress_20220501_143815_5649.jpg
Compress_20220501_143817_7710.jpg


Some worn-out parts for reference
Engine Bearings
Compress_20220426_112444_4842.jpg

Compress_20220426_112446_6406.jpg

Oil Pump
Compress_20220426_112521_1071.jpg


Compress_20220426_112523_3007.jpg

See those deep scratches in the pump body? It was from driving with a low engine oil level.
Those scratches on the pump body may affect the oil pressure heavily. If we reuse this pump, it may kill the newly rebuilt engine pretty soon.
Compress_20220426_112523_3527.jpg
Compress_20220426_112526_6104.jpg

Rubber & Metal Hoses
Compress_20220501_144331_1054.jpg

Result of using tap water/not changing coolant for long time
Compress_20220503_151315_5647.jpg

Compress_20220503_151317_7303.jpg
Compress_20220503_151318_8508.jpg
 

mayankdixit

Honoured Member
Joined
May 16, 2014
Messages
1,885
Likes
3,360
Location
kanpur
Nice work! Enjoying your pics.


looks like chisel is used here to hammer it open instead of proper socket. Hope you replaced that.
1651589923648.png
 
Last edited:
Thread Starter #28
Joined
Oct 1, 2018
Messages
73
Likes
179
Location
Kollam
Thread Starter #29
Joined
Oct 1, 2018
Messages
73
Likes
179
Location
Kollam
Servicing the Starter
Starter motor doesn't have any type of issues, but while doing jobs like this, we must check each and every part to ensure trouble-free operation.
Starter Motor (OEM is Valeo)
Compress_20220501_143345_5678.jpg

Removing solenoid
Compress_20220501_143348_8129.jpg
Compress_20220501_143350_0109.jpg
Compress_20220501_143352_2056.jpg

Carbon dust inside motor
Compress_20220501_143354_4817.jpg

Carbon brushes are in OK conditon
Compress_20220501_143357_7077.jpg

Planetary Gears (This is a Gear Reduction type starter and it consumes less power than direct drive starter motors)
Compress_20220501_143359_9497.jpg
Compress_20220501_143403_3792.jpg

Armature
Compress_20220501_143407_7282.jpg

Cleaning commutator
Compress_20220501_143410_0765.jpg
Compress_20220501_143412_2686.jpg
Compress_20220501_143415_5382.jpg

After cleaning everything
Compress_20220501_143417_7212.jpg

Compress_20220501_143421_1204.jpg

Applying grease to gears
Compress_20220501_143423_3879.jpg

Compress_20220501_143419_9574.jpg

Assembling everything back
Compress_20220501_143429_9074.jpg
Compress_20220501_143430_0406.jpg
Compress_20220501_143431_1747.jpg

Work completed
IMG_20220507_142410.jpg
 

Attachments

Thread Starter #30
Joined
Oct 1, 2018
Messages
73
Likes
179
Location
Kollam
Finally, everything arrived! [clap]
Compress_20220508_125414_4652.jpg
Compress_20220508_125415_5850.jpg
Compress_20220508_125413_3561.jpg
Compress_20220501_143943_3683.jpg
Compress_20220501_144016_6170.jpg
Compress_20220501_144018_8649.jpg
Compress_20220501_144021_1023.jpg
Compress_20220501_144023_3659.jpg
Compress_20220501_144025_5524.jpg
Compress_20220501_144027_7095.jpg
Compress_20220501_144029_9087.jpg
Compress_20220501_144031_1195.jpg
Compress_20220501_144033_3126.jpg
Compress_20220501_144035_5253.jpg

Head gaskets come in 3 types (A, B, and C). When we resurface the head/block, it reduces the thickness of the block/head and this may affect the compression ratio a little. To maintain that compression ratio, we use a gasket with a higher thickness (B has more thickness than A, and C has more thickness than B). Here I am using type C.
Compress_20220501_144038_8009.jpg
Compress_20220501_144044_4525.jpg
Compress_20220501_144040_0588.jpg
Compress_20220501_144049_9748.jpg
Compress_20220501_144047_7322.jpg
Compress_20220501_144052_2651.jpg
Compress_20220501_144055_5540.jpg
Compress_20220501_144058_8575.jpg
Compress_20220501_144101_1652.jpg
Compress_20220501_144104_4891.jpg
Compress_20220501_144108_8287.jpg
Compress_20220501_144111_1365.jpg
Compress_20220501_144117_7411.jpg
Compress_20220501_144114_4835.jpg

All rubber hoses
Compress_20220501_143947_7822.jpg

Items purchased online
Clutch cover bolt, Genuine Silicone Sealant (OEM is ThreeBond 1215), Boot Lamp Assembly.
Always use the recommended high quality RTV sealant for this type of work. Never use the cheap ones available on the market.
The quality of this RTV sealant is excellent and I really loved it!! The quality of the seal is exactly like the factory.
Compress_20220501_143530_0753.jpg

Compress_20220501_143534_4229.jpg

OEM's Packing
images - 2022-05-08T143220.129.jpeg

Engine Oil 5w30 Fully Synthetic
Compress_20220501_143556_6887.jpg
Compress_20220501_144755_5023.jpg

Ciaz Gear Knob
Compress_20220501_144727_7458.jpg

Transmission Oil- 75w 90 (2.53L)
Compress_20220508_141122_2614.jpg
 

Top Bottom