Aftermarket Rear Defogger


Thread Starter #34
Joined
May 1, 2011
Messages
3,594
Likes
761
Location
Bangalore
Here is the detailed info about the rear wiper..

Alto VXI/Wagnor wiper rear motor
Part no - 38810M76GA0
SR159200-341C, Make - Denso India ltd..
Cost 2,300 for wiper motor, 110 for wiper rod, 200 rs other consumables.

Here we need to drill 3 holes totally..
1 for wiper rod, one for the mount (other mount can be fixed to the door pad hole.)
Last hole for the washer..

Wiring, I have taken a separate wire from front wiper (int mode).
I have also taken the water wash pipe from the front tank through the side pillar molding. In 800 we have a option to place 2 wash motors.
I have used Omni's wash nozzle. Wiper rod again Omni's, but need some bending done.. wiper blade same size as front one.

One suggestion, please don't install the rear wash where I have installed, please try to get it in top portion of the dickey door it sprays better...

Here are some pic's -- Sorry for the delay..

Wiper Motor -

18022012095.jpg

Wiper Motor Part No -

18022012097.jpg

Wiring taken from front wiper..

18022012101.jpg

Rear Wash Nozzel..

18022012094.jpg

Coverage area of the rear wiper

18022012103.jpg
 
Last edited:
Joined
Sep 14, 2011
Messages
937
Likes
285
Location
Kochi
@Varun560061 I have a doubt.., how can operate the rear wash and wipe separately as you connected to the front wiper.
 
Thread Starter #37
Joined
May 1, 2011
Messages
3,594
Likes
761
Location
Bangalore
I have connected to the front int mode, and have a separate switch for it..

Turn on the front wiper to int mode and turn on the switch it works.
Here in my case even the wiper speed increases as per the front wiper speed.

Great to know that you like my review and doing it on your car..
Post the pic;s after you do it..
 
Thread Starter #39
Joined
May 1, 2011
Messages
3,594
Likes
761
Location
Bangalore
Ha Ha , you will laugh..

I have a switch to use two horns. I have connected to it.. When I switch on the horn 2 switch and press the horn on the steering water sprays !!
 
Joined
Sep 14, 2011
Messages
937
Likes
285
Location
Kochi
great., I loved it that concept, But any idea about alto water tank will accommodate 2 motors? and how much will cost for the motor?
 
Thread Starter #41
Joined
May 1, 2011
Messages
3,594
Likes
761
Location
Bangalore
great., I loved it that concept, But any idea about alto water tank will accommodate 2 motors? and how much will cost for the motor?
I guess Alto's water tank is located inside right fender.. I will check and let you know.

Anyways you can just drill a small hole for motor inlet add some silicon paste so that water wont leak. Cost of motor 150rs.. [:)]
 
Joined
Sep 14, 2011
Messages
937
Likes
285
Location
Kochi
I guess Alto's water tank is located inside right fender.. I will check and let you know.

Anyways you can just drill a small hole for motor inlet add some silicon paste so that water wont leak. Cost of motor 150rs.. [:)]
I will check my tank and I think i need to order the two dash switch of alto 1.1 for the wiper function btw I dont know the parts no :)
 
Thread Starter #43
Joined
May 1, 2011
Messages
3,594
Likes
761
Location
Bangalore
I guess you wont get those switches, even I searched a lot but could not get them..

Any ways try.. or we can adjust with anupam switches..
 

Top Bottom