Engine de carbonisation and valve setting had done on bike.ASS
taken 4 days and Rs.1448 for this. Since i done the engine oil change 2 days before the work,Oil change not done after that.
Bike got smoother after that. But the bike feels struggle to breath due to the clogged air filter.
Since air filter not in stock and no other option, i just taken out the filter put some holes with safety pin in the paper filter. This made the ride more smoother for the first 20 kms today morning and again the bike was difficult to catch up speed above 70 km/hr. It feels like the accelerator cable become tight while riding but the Accelerator is free and easy to twist when the gear is in neutral or engine off.
Damages after the work
1. Black paint lost on the engine head pins
2. Tank fixing not done properly and the water drain pipe from the tank has jammed between the chase and tank made rain water blockage on the tank opening area. This i had fixed by removing and re fixing of drainage pipes.
3. one horn was not working, while checking i found that the wire cut from the horn socket. I am sure this happened while the mechanics work on head removal but they even not care to reconnect that wire.
4. Washing done was just to remove the oil stains from engine area and not cleaned any other area except water splashing. This made water enter inside the Head lamp. Though i washed this bike several times in service station, water never get in the Head lamp and i suspect how this happened this time. The HL doesn't have a scratch any where.
Anyway i am just happy that they charged only less than half amount than their main dealer quoted which is just 8 km away and they doesn't told any non sense like them that it needed piston, valve & rings need to be replaced, since i was not done de carbonisation on specified KM.