Anything above 55/60W needs an external relay & wiring kit. The factory fitment comes with relay, yet the wires are not meant to handle higher wattage bulbs.
I put 80W Philips in all the lamps along with wiring and relay, lights effects are good, however the high beam focuses more on the left side. Low beams does a decent job.
Got to know that fogs are H3 and 55W lamps, please suggest a suitable and powerful upgrade bulbs
Hi ,
I know the screw to align the low beam lights in the Vista, can any one help me out to know the screw or any switch that helps me to align the High beam lighting in the Vista Refresh.
Took for a night drive after upgrading the headlamps, the spread is good from 80W and the highbeams are aligned more to the left-side so that the illumination is fully at the left and doesn't affect the vehicles coming in opposite direction. However there's no long throw, have plans to install auxiliaries later.
Hi ,
I know the screw to align the low beam lights in the Vista, can any one help me out to know the screw or any switch that helps me to align the High beam lighting in the Vista Refresh.
Hi Viswas! There are adjustments for the high beam also. I got it done for my Manza. and a few other in this forum also got it done. You can check here