Now Need Advice on Head-Unit


Joined
Aug 9, 2011
Messages
1,994
Likes
344
Location
Noida
As suggested by someone, try resetting the HU by inserting a small pin in the hole in the HU . If still the problem persists try locating the power cable to HU to see if it is shot down or loose. Did you smell any burning at the time it stopped working, if yes, most probably the mosfets are fried.

freakdude.
 
Joined
Aug 9, 2011
Messages
1,994
Likes
344
Location
Noida
Thanks freakdude

I tried searching hole but was not able to find any, I will put pic here.
No smell.
The small pin hole is not in the face plate that we detatch, it is in the circuit box that remains attached to the dash. Usually near the CD loading tray on top left or bottom right.

freakdude.
 
Joined
Aug 2, 2011
Messages
2,757
Likes
437
Location
Pune
The small pin hole is not in the face plate that we detatch, it is in the circuit box that remains attached to the dash. Usually near the CD loading tray on top left or bottom right.
Not able to find it
 

Top Bottom