Isuzu D-Max V-Cross Ownership Review: Remapped 165BHP [34K Kms Crossed]


Joined
Oct 15, 2011
Messages
4,733
Likes
4,009
Location
Some Village
Yes be careful with those clips, very easy to break, pry using a screw driver softly
I guess I will wait for a youtube video/guide to understand it properly.
Since this was a big one , i went to a proper michelin store and had a big patch installed - they worked on it for over a hr - rubbing cleaning and eventually patching
The guy I gave to is going to work on it for 3 days. He is going to go some process like heat the tyre and fill melted rubber or something. Will report back.
 
Thread Starter #287
Joined
Dec 1, 2011
Messages
3,092
Likes
1,899
Location
Pune
There is no need for it - the tyre might lose its integral strength. Dont go for such local jhugad!
I am assuming the hole diameter is the width of the bolt.
 
Thread Starter #292
Joined
Dec 1, 2011
Messages
3,092
Likes
1,899
Location
Pune
I got a bit delayed doing the 30K service , as per Isuzu its minor and they only do the front hub greasing apart from the check ups.
I changed the oil, oil filter and fuel filter as well as i have a habit of doing this every 10k kms. Cleaned AC and Air filter, torqued suspension, cleaned the brake liners.
Also oiled the rear cover motor gears


Hub greasing and greased the upper arms, also grinding the upper arm cap slightly.

IMG_20190625_124556.jpg
IMG_20190625_124812.jpg

Hub oil seals
IMG_20190625_125049.jpg
IMG_20190625_125413.jpg

Old fuel filter, this was replacedthough isuzu has a 20k km interval
IMG_20190625_143536.jpg


Cleaned the hub items with diesel, greased and put back
IMG_20190625_121946.jpg


In went liquid gold from Shell

IMG_20190625_120849.jpg


Greased all the propeller shaft points too
IMG_20190625_115744.jpg

Finally on monsoon duties!
IMG_20190622_154417.jpg

IMG_20190622_154457.jpg

 
Last edited:
Top Bottom