Please post some photos of wobble washers and hub rings and their installation. My first choice is 14" Palio Alloys (5.5J). That will allow me to mount 185/60/R14 tyres. Otherwise some other brand in 14 or 13. Also 13" Old Siena alloys are nice.
I guess 185 tyre would be too wide for Uno and you might have to put some extra effort to steer. Did Uno come with the 155/70/R13 Tyres?
1. Hub ring was made using a lathe, the raw material was an industrial grade mild steel seamless pipe. It was press fitted into the centre hole of the Alloy wheel. (Lathe guy charged me Rs 100/- per ring)
2. The threads in the innner side of wheel of 16 nos of M-800 wheel nuts where drilled out to give a 13 mm inner dia. (Because I had used a 100 PCD wheel) (Rs 7/- per nut and totally Rs 100/- to drill a hole oof 13 mm dia on all 16 nuts)
3. I used 12 mm Stainless steel washers for the wobble. (Rs 8/- per washer)
4. As the offset of the wheel was not apt to the 118NE specs, and also it did foul with the A-arm while steering at extreme positions, I had to get 8 mm thick spacer plates to bring the wheels at the right track. (Rs200/- for the raw material and Rs 250/- for machining)
5. The bolts were the rear wheel damper bolts of M-800. They were of the same thread size and pitch as the wheel bolts of 118NE. (Rs15/- or Rs 20/-, dont remember exactly)
Hope the pictures speak better.
-IlangoP