DIY Piston Rings Change For Bajaj Pulsar 150


Thread Starter #1
Joined
Apr 1, 2013
Messages
212
Likes
27
Location
pathankot
Dear all
i am using pulsar 150 2008 which i painted in black
i noticed decrease in engine oil even ride for 100km
so i decided to change pistion rings my self as DIY

Please refer to pics for performing diy

IMG_20170316_194840.jpg

IMG_20170313_160758.jpg

First of all you need to remove mounting of engine and CDI connection to be removed along with plug wires and starter wires

IMG_20170316_190840.jpg

IMG_20170316_190847.jpg

IMG_20170316_190854.jpg

IMG_20170316_195847.jpg

Tools required
allen key set
8 mm 10 mm 12mm and 14mm socket wrench a plier and screw driver

piston and bore was in good condition so i just changed rings total cost 170/-

IMG_20170316_200429.jpg

IMG_20170316_200436.jpg

IMG_20170317_075205.jpg

IMG_20170317_075221.jpg

IMG_20170317_190855.jpg

IMG_20170317_192305.jpg

now bike is not consuming engine oil and improved mileage

IMG_20170317_190909.jpg

IMG_20170317_192310.jpg
 
Last edited by a moderator:
Joined
Jun 28, 2016
Messages
6
Likes
0
Location
hyderabad
I can see your cylinder bore is shinning honing marks are gone I am pretty sure this engine must be low on compression if you didnt assemble it bas not it is correct time to hon cylinder and install new piston rings
 
Top Bottom