DIY Head Unit Cooling Fan For Wagon-R


Joined
May 1, 2011
Messages
3,594
Likes
761
Location
Bangalore
Re: cooling Fan for Head Unit wagon R HU

Nice mod, Please post few more pics showing where exactly the screws are mounted and how the trim has to be removed.

Also where is the fan connected.
 
Thread Starter #3
Joined
May 23, 2014
Messages
604
Likes
593
Location
coimbatore
DSC_0260.JPG

DSC_0262.JPG

DSC_0263.JPG


DSC_0265.JPG

DSC_0266.JPG

DSC_0270.JPG

DSC_0271.JPG

DSC_0269.JPG

pull the HU outwards using screwdriver , there is a latch beside the pause button.. see it using light.. insert flat head screw driver between the gap and make the gap more to slide the HU
 
Last edited:
Joined
May 1, 2011
Messages
3,594
Likes
761
Location
Bangalore
Thanks for the pics.

After removing 3 screws its just pull action rite ? I guess this is same for normal Waggy Vxi ? I am planning to remove the HU to check if remote sensor can be connected.

BTW stingray comes with remote for HU ? Few more doubts..
Will a 6.5 inch JBL componet speaker fit directly onto the stock slot ? Will window winder come in contact with speaker when the window is rolled down.
Any spacer required..
 
Last edited:
Thread Starter #5
Joined
May 23, 2014
Messages
604
Likes
593
Location
coimbatore
Hi...
The remote sensor is already in hu..
Its a 500 rs acc.
You can install any round speaker less than =6.5 in
OF COURSE yes with a spacer... No window wont get contact.. And there is lot of spacs beneath doors to keep a red brick too ;)
Waggy has big doors..
Try to have a speaker with box in rear...
Door speaketd wont make you happy..
But components can.. But bass will make door vibrate.
Better do a custom enclosure for door speaker too..DIY of mine coming soon
 

Top Bottom