phew it was sorted out with no BIG expense.
THe biggest expanse has been my family holiday & additional 22000 for the taxi round trip.
This problem is not yet been "fully" sorted out as this problem is a secondary problem & now I even am able to related this to its primary left pulling problem which I posted a video & details here on page 3 a video & page 4 showing the images. http://www.theautomotiveindia.com/fo...d-apart-4.html Brand New Tata Indigo Manza Pulling To Left
For left pulling problem I took the car to Urmil motors & sat there the whole day, they say that they have sorted out the left pulling problem & GM of urmil motors didn't gave me any alignment report but said that the caster was out by 1.6, which I cant understand as to when the car went to Oberai motors for alignment it did show correct reading & now another tata workshop say the reading were out.
Nevertheless they have sorted out the left pulling problem by some jugad (manipulation) & when I rotate the 2 front wheels the left wheel is having friction with brake pads & not moving freely as the right wheel is moving freely.
The technician at urmil motors say this is very normal for the left wheel as it generates more power hence get hotter..............they are trying to make fool of me knowing I don't know much about cars. Is it true ?
I drove back home 65kms & the left wheel rim is so hot that you will burn the finger if you touch it & the disk is similarly hot so I didn't even try to touch it whereas right wheel is normal hot due to braking & runing, so this confirms that they are not admitting to the fault right from the day 1 due to which the car had left pulling problem now by some manipulation they have sorted out the problem but created another problem which will have some negative effect on the normal running of the car.
I feel that the car has a misaligned disk due to accident or manufacturing fault but they are not owing it up as a problem. How can the disk alignment be checked when wheel alignment shows ok (don't even know the wheels are aligned or not as Urmil motors have not given the report)
Its indeed a nightmare & that still seems to continue even now.