How To Detach Gear Cables Linkages?


Thread Starter #1
Joined
Jan 28, 2014
Messages
43
Likes
10
Location
Rajkot
This is about the Fiat Palio 1.2 nv petrol.
I need help for removing the Gear shifter Rod and Support Block (white plastic) of the car.
It is linked with Selector and Engagement cables for gears. The cables are attached through linkages as shown in the picture.
Colud anyone help me by guiding, - How to detach these linkages?
Urgently required.
Thanks to all in anticipation.
Navin Talati / 27-02-2017
 

Attachments

Joined
Aug 18, 2015
Messages
1,183
Likes
805
Location
Bangalore
I have discussed with my personal mechanic, post few more pictures in different angles, by the way why you want to remove?

-suryaputhra
 
Thread Starter #3
Joined
Jan 28, 2014
Messages
43
Likes
10
Location
Rajkot
Actually the Gear Housing Block (Gear-shifter Block - a white plastic part) is broken and I want to replace that. For this reason, I must need to detach this linkage.
I carefully tried to release the linkage and could do it. So far as the Fiat Palio 1.2 nv car is concerned, this linkage is simply Pull-Press type. No need to remove mounting and fixing clips of the Engagement and Selector cables. Somply release the Gear Lever Housing (white plastic block) from inside the car cabin by undoing the 4 nut-bolts (10 mm) and make the gear stick free to
move and twist. Then you can release these linkages easily.
See the picture.
Thanks to all.
Navin Talati /28-02-2017
 

Attachments


Top Bottom