Thread Starter
#1
Is the following automated system can be designed and developed in a four wheeler i.e. Car, Jeep, Truck etc ?.
Example :
Driver is driving the vehicle at 160 Km/Hr speed on a highway.
Suddenly he/she realizes that the brakes have failed now in this case the driver has to use his all driving skills to avoid collisions and accidents.
The Automated System designed will slowly and gradually halt/stop the automobile even in case of brakes failure.
Another way is "Prevention is better than cure". A instrument control Panel indicating the possibility of brakes wear and tear out.
Is it possible to automate the motion stop operation in event of vehicle brakes failure ?
Thanks & Regards,
Prashant S Akerkar
Example :
Driver is driving the vehicle at 160 Km/Hr speed on a highway.
Suddenly he/she realizes that the brakes have failed now in this case the driver has to use his all driving skills to avoid collisions and accidents.
The Automated System designed will slowly and gradually halt/stop the automobile even in case of brakes failure.
Another way is "Prevention is better than cure". A instrument control Panel indicating the possibility of brakes wear and tear out.
Is it possible to automate the motion stop operation in event of vehicle brakes failure ?
Thanks & Regards,
Prashant S Akerkar