Originally Posted by sunbaj
Sorry to hear that you are facing issue with Uva. As you have mentioned that you have done something related to the alternator check as to whether the alternator has been fixed and aligned properly. this might be one of the reason who engine noise.
No engine noise was not there even after alternator was changed, they changed it as I was getting engine check warning. I didn't get the warning for a month or so but again started getting it. I showed it at GM ASC and they said no issues but again I am getting it, though I have found a workaround - switch off the engine in 1st gear and restart it and do this process couple of time and it goes.
Regarding noise, this is apparent from last one month, again visited GM ASC and this guy told me get a new car, he checked it for bearning as I insisted but said no problem with bearings, did alignment (that to couple of time as car was pulling to left) however I still have noise from the front of car and steering vibrates /shakes wildly at 100 KM.
Originally Posted by Releesh
Is it your problem no 1,2 & 4 were there before the alternator work done. As Sunbaj said it may be due to the alternator/alternator fixing. Problem no 2 may be due to either tire or Disc. How is your disc and tires condition?
Thanks...well tyre are almost new Yokahama A drive (2 brand new & 2 just 1 yr old), I also got the brakes changed last year. So only probable area for noise could be bearing, which I checked at GM ASC in jaipur, though they acknowledged the noise, they didn't provided the solution. I think I have to escalate it to their management.
Also, what is the way to check if wheel bearings are gone ?
Originally Posted by Surfer
sunit5 Have you visited your authorized service station/s ? What SA suggested you their?
Also try to get your car checked from a good local mechanic tell all your issues and check this thoughts.
Thanks surfer, the GM ASC SA are not very helpful, need to escalate now. I did went to a local mechanic and he said issue could be bearings. Now I am not sure from where I should get it replaced locally or GM ASC.