Finally got a belt 1060 , but the thing is we wanted a wider one , it slightly touches the side of other drive belt.
Driving with that.
Procedure to be followed now.
1. wait till heater cut off.
2. once cut off , crank the engine.
3. after start wait for the belt to stop the noise. yeah the belt makes creech sound and the rpm will be below the 800 mark rpm.
4.suddenly the rpm raises till 1.2k rpm and the belt noise stops.
5. fit for drive.
switch on ac and headlight all together , the creech sound appears again in low idle . some times carries away till normal driving rpms too. just leave the accelerator and push again , the belt noise stops.
Does anybody here knows the exact belt sizes to be used.
And the drive with manza. ,
In a free road , the manza with 5 people on board and sierra with 3 people on road ,
manza was driven with ac and mine without ac(since it was started just 5 min back , didnt want to hear the creech noise!)
i was pushing my pedal to catch the manza , it was like hell driving for others in car.
atlast i caught the manza at 80kmph. hehe. but i suffered damn bad acceleration .
typing and thinking , should i have retained the accent
A picture taken together.