Thank you Lucas, Aditya, Music_Swift,
This is how I did it What do you need
3. Wife who will shop for cosmetics so that you can get the plastic container
4. Gold Spray paint(Preferably Chrome finish one)
5. Some old news paper
So start off by putting the paper on the steering wheel and trace the Chevrolet logo.
After you get a nice copy, apply some glue on the backside and stick the plastic material which you want to make your logo with.
The material I wanted to use at first was a Veneer board I had lying around from some work in the apartment. But dropped the idea because the logo was 3D on the steering wheel(it protruded out a bit in the middle) and that the veneer board wouldnt be able to bend to stick it correctly.
So I took the plastic bag that my wife has, cut a small portion and stuck it to the back of the traced-out logo.
Cut the plastic slowly and perfectly. Paint It
I used a Gold Spray paint that I got from my local Hardware store. Although I would have preferred to have a Chrome one that gives a glossy finish. The store didnt have it.
So applied some glue and stuck the transparent plastic logo to the newspaper and began spray painting it.
Painted it couple of times with 30 minute interval in between.
I ended up with this. Downside
Since it is plastic, I know that if by accident the gold logo on the steering comes in contact with a sharp object, it will most probably lose its color on contact. Normal touching is fine. I've had it for a week almost now and it is great.
Such a big text for such a small DIY
If you are still reading, thank you for your time
I like to write