The Automotive India

The Automotive India (http://www.theautomotiveindia.com/forums/)
-   Do It Yourself (http://www.theautomotiveindia.com/forums/do-yourself/)
-   -   DIY Piston Rings Change For Bajaj Pulsar 150 (http://www.theautomotiveindia.com/forums/do-yourself/28909-diy-piston-rings-change-bajaj-pulsar-150-a.html)

ramankanythia 31st March 2017 09:41 AM

14 Attachment(s)
Dear all
i am using pulsar 150 2008 which i painted in black
i noticed decrease in engine oil even ride for 100km
so i decided to change pistion rings my self as DIY

Please refer to pics for performing diy

Attachment 223633

Attachment 223634

First of all you need to remove mounting of engine and CDI connection to be removed along with plug wires and starter wires

Attachment 223635

Attachment 223636

Attachment 223637

Attachment 223638

Tools required
allen key set
8 mm 10 mm 12mm and 14mm socket wrench a plier and screw driver

piston and bore was in good condition so i just changed rings total cost 170/-

Attachment 223639

Attachment 223640

Attachment 223641

Attachment 223642

Attachment 223643

Attachment 223644

now bike is not consuming engine oil and improved mileage

Attachment 223645

Attachment 223646

saboor73 31st March 2017 03:44 PM

Re: DIY Piston Rings Change For Bajaj Pulsar 150
 
I can see your cylinder bore is shinning honing marks are gone I am pretty sure this engine must be low on compression if you didnt assemble it bas not it is correct time to hon cylinder and install new piston rings

ramankanythia 31st March 2017 09:42 PM

Re: DIY Piston Rings Change For Bajaj Pulsar 150
 
i didnt do anything to cylender just cleaned it with petrol and installed new rings its working fine


All times are GMT +5.5. The time now is 02:36 PM.

Powered by vBulletin®
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
©2008 - 2017, The Automotive India. All Rights Reserved.