Originally Posted by shreeni0403
Good one ! Wishing you all the best for this project.
Originally Posted by sarthak8192
@sarthak8192 the circuitry is completed n is currently running in my car. But it still needs a proper enclosure n i am currently working on that. So, I haven't taken proper photos yet. will update it when possible.
Originally Posted by goldenfox7
You could still get the temp and volt readings from a M800 since the provisions are already there either in the instrument console or the lighter adapter. How do you plan to tap into the engine/ECU to get the tacho reading?
I am taking the tacho signal from ignition coil ground and for voltage i'm using the spare connector which comes for dashboard clock.
I'm using precision temperature sensor which has an accuracy of 0.1 degree C. Haven't decided on the engine temp source location yet. Have to finalize a proper enclosure before getting to those additions.
I'm using a 8 point selector switch so can view 8 different parameters.