Originally Posted by vinie
been away for long
here are pics of the lights done since then
and my ktm 390 with the projector and its out put pictures
Hi Guys, look at my AHNC 2014 with Bi-Xenon Projectors installed in Hyderabad.
Hi Vinie, By going the full thread, I want some clarification on my fitment of Projectors.
1. Bi-Xenon Projector is installed in Low Beam. When I switch ON high beam, will the Projector also glows in High beam. (I could see the line of cutting in low beam clearly, and in high beam, I could not see the light line cutting)
2. The DRL & Angel, Devil eye setup is connected to parking light. (I hope from this post pic, you installed DRL in ANHC 2014). To activate the DRL and Angel eye, I need to switch on the parking light which leads to glowing of the rear lights. And my OEM
, HU Display ( which shows the display of reverse camera) brigtness reduces. I'm not comfortable to change the brightness of the HU continuously.
Is it possible to connect the DRL & Eyes directly without voiding warranty? so that I need not to switch on Parking light.
3. As the ANHC 2014 has different lamps for High & Low beams, can I install another set of Projector Headlight in High beam area? I yes, what is cost of projector? What type of Projector you recommened?
My current Installation is 5000K white. I prefer to maintain between 4300K to 6000K